A
-
Absorption refrigeration cycle
A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
-
Accepted: 24 January 2016
Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
-
Adiabatic effectiveness
Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
-
Aerodynamic characteristics
Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
-
Analytical solution Hollow cylinder Asymmetric Time dependent
Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
-
Arcan Fixture
Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
-
Articultaed Vehicle
Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
-
Artificial Neural Networks
Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
-
Artificial Tactile Sensing
Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
-
Aspen HYSYS software
Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
-
Auxiliary power unit
Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
-
Available Online: 8 November 2016
Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
-
Average Nusselt Number
Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
-
Axial compressor
Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
B
-
Bimetal tube
A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2017, Pages 819-828]
-
Biogas
Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
-
Biomass
Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
-
Blade element theory
Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
-
Bolt clamping force
Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
-
Boundary Conditions Estimation
Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
-
Boundary element method
Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
-
Bow
Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2017, Pages 773-784]
-
Brownian motion
Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
-
Building Thermal Load
Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
C
-
Carbon/Epoxy
Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
-
Cavity
Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
-
Center of volume criterion
Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2017, Pages 829-838]
-
CFD
Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
-
Circumferential semi-elliptical crack
Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2017, Pages 665-672]
-
Cladding
Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2017, Pages 839-850]
-
Closed circuit boundary condition
Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2017, Pages 709-720]
-
Cold Roll Forming
Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2017, Pages 773-784]
-
Combined cooling and power production
A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
-
Combustion
Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
-
Combustion chamber
Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
-
Compressor Damage
Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
-
Computational fluids dynamics
Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
-
Condition monitoring of helicopter tail gearbox
Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
-
Conjugate Gradient Method
Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
-
Convection heat transfer
Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
-
Critical Thickness
Critical Thickness of a Porous Layer with Respect to Porosity and Its Effect on Heat Transfer Rate [Volume 49, Issue 1, 2017, Pages 171-184]
-
Cross-flow filtration
Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
-
Cross section size
Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2017, Pages 685-696]
-
Curved-boundary
Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
-
Curved Boundary
Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
-
Cylinder
Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2017, Pages 665-672]
-
Cylindrical nanoshell
Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2017, Pages 721-730]
D
-
Dehumidification
Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
-
Delaminated beam
Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2017, Pages 731-742]
-
Density ratio
Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
-
Design improvement
Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
-
Differential quadrature method
Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2017, Pages 759-772]
-
Diffuser
Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
-
Discrete wavelet transform (DWT)
Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
-
Double population distribution functions
Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
-
Drag
Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
-
Dynamic instability
Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2017, Pages 785-794]
-
Dynamic Stability
Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
E
-
Eccentric annulus
Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
-
Eccentric hole
Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
-
EFFICIENCY
Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
-
Elastic foundation
Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2017, Pages 721-730]
-
Elastic foundation
Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2017, Pages 709-720]
-
Electro-osmotic flow
Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
-
Electrostatic
Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2017, Pages 805-818]
-
Euler-Bernoulli beam
Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2017, Pages 805-818]
-
Exact method
Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2017, Pages 805-818]
-
Expanded metal tube absorbers
Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2017, Pages 685-696]
-
Extrusion
A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2017, Pages 819-828]
F
-
Fast terminal sliding mode control
Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
-
FEM
Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
-
FE Simulation
Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
-
FG Panel
Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
-
Film cooling
Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
-
Filter cake
Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
-
Finite element simulation
Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2017, Pages 851-862]
-
Finite elements method
Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2017, Pages 863-874]
-
Finite volume method
Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
-
Five-hole probe
Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
-
Flame stability
Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
-
Flower Pattern
Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2017, Pages 773-784]
-
Flow visualization
Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
-
Flutter speed
Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2017, Pages 785-794]
-
Forced Pitching Oscillation
Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
-
Forming force
Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
-
Fouling
Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
-
Free Surface Flow
Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
-
Frequency
Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
-
Fresh water
Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
-
Friction stir lap welding
Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2017, Pages 863-874]
-
Fuel injection
Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
-
Functionally graded material
Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2017, Pages 721-730]
-
Functionally graded materials
Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2017, Pages 759-772]
-
Functionally graded smart plate
Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2017, Pages 743-758]
G
-
Gappy Data
Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure [Volume 49, Issue 1, 2017, Pages 101-112]
-
Gasification
Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
-
Gas pressure increasing station
Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
-
Gas turbine
Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
-
Gas turbine
Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
-
Gauss’s laws
Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2017, Pages 743-758]
-
GDQ method
Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2017, Pages 697-708]
-
Gear wear’s fault
Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
-
Generalized Predictive Filter
Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2017, Pages 795-804]
-
Genetic algorithms
Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
-
Geometrical method
Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2017, Pages 829-838]
-
GTCP85-180 micro turbine
Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
H
-
Hamilton’s principle
Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2017, Pages 721-730]
-
Hat Channel Section
Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2017, Pages 773-784]
-
Heat transfer augmentation
Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
-
Helical Tube
Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
-
Helmholtz-Smoluchowski model
Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
-
Heterogeneous zeta-potential
Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
-
High efficiency Stairmand cyclone
Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
-
High-Knudsen
Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
-
Hole Drilling Method
Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2017, Pages 839-850]
-
Hot Incremental Forming
Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
-
Humidification
Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
-
Humidification-dehumidification
Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
-
Hydroforming
Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2017, Pages 851-862]
-
Hyperelastic Constitutive Model
Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
-
Hyper-elastic material
Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
-
Hypersonic wind tunnel
Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
I
-
Impact loading
Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2017, Pages 685-696]
-
Imperialistic Competition Algorithm
Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
-
Insulation
Critical Thickness of a Porous Layer with Respect to Porosity and Its Effect on Heat Transfer Rate [Volume 49, Issue 1, 2017, Pages 171-184]
-
Interface oscillation
Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
-
Interlaminar fracture toughness
Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
-
Inverse Analysis
Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
-
Inverse Analysis
Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
J
-
Jet
Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
K
-
Kalman Filter
Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2017, Pages 795-804]
-
Keywords:nanofluid
Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
-
K nearest neighbor (KNN)
Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
L
-
Lane keeping system
Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
-
Larson Miller parameter
Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2017, Pages 673-684]
-
Laser welding
Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
-
Lateral dynamic model
Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
-
Lattice Boltzmann method
Critical Thickness of a Porous Layer with Respect to Porosity and Its Effect on Heat Transfer Rate [Volume 49, Issue 1, 2017, Pages 171-184]
-
Lattice Boltzmann method
Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
-
Lattice Boltzmann method
Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
-
Lifetime fuel consumption
Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
-
Lindstedt-Poincare method
Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]
-
Longitudinal Strain
Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2017, Pages 773-784]
M
-
Melt flow
Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
-
Microchannel
Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
-
Micro electromechanical systems
Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2017, Pages 805-818]
-
Micro turbine
Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
-
Mixed Mode Fracture
Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
-
Mixing
Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
-
Mixing entropy
Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
-
Modeling
Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
-
Modified Couple Stress Theory
Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2017, Pages 721-730]
-
Modified Couple Stress Theory
Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2017, Pages 709-720]
-
Monte Carlo simulation
Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2017, Pages 731-742]
-
Multi-layer tube
Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2017, Pages 685-696]
-
Multilinear Structure
Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
-
Multiphase flows
Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
-
Multi relaxation time
Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
N
-
Nanobeam
Investigation of surface effects on free torsional vibration of nanobeams [Volume 49, Issue 2, 2017, Pages 309-316]
-
Nanofluid
Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
-
Nanofluid
Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
-
Nanoplate
Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
-
Nanoscale
Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
-
Natural convection
Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
-
Natural convection
Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
-
Natural convection
Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
-
Natural frequency
Investigation of surface effects on free torsional vibration of nanobeams [Volume 49, Issue 2, 2017, Pages 309-316]
-
Natural frequency
Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
-
Neural Network
Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
-
Newtonian lubricant
Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2017, Pages 697-708]
-
Nonlinear buckling analysis Boron nitride nonlocal Timoshenko nano beam DQM Modified couple stress theory Elastic foundation
Nonlinear Buckling Analysis of nonlocal Boron Nitride Timoshenko nano beam based on Modified couple stress theory using DQM [Volume 49, Issue 2, 2017, Pages 241-252]
-
Non-Newtonian fluid
Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
-
Non-uniform rotor
Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2017, Pages 759-772]
-
Nozzle
Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
-
Numerical Analysis
Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
-
Numerical investigation
Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
-
Numerical modeling
Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
-
Numerical procedure
Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
-
Numerical Solution
Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
O
-
Optimal control
Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2017, Pages 805-818]
-
Optimal estimation
Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2017, Pages 795-804]
P
-
Parachute
Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
-
Parameter Study
Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
-
Partially submerged propeller
Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
-
Penetration depth
Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
-
Performance Deterioration
Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
-
Permeability
Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
-
Perturbation method
Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2017, Pages 743-758]
-
Peters unsteady aerodynamic
Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2017, Pages 785-794]
-
PFRC
Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
-
Photovoltaic thermal
Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
-
Plain Wake
Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
-
Plasma actuator
Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
-
Polymer electrolyte membrane fuel cell (PEMFC)
Effects of Agglomerate Arrangement on Cathode Catalyst Layer Performance in PEM Fuel Cell [Volume 49, Issue 1, 2017, Pages 203-218]
-
Polynomial Method
Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
-
Porous Layer
Critical Thickness of a Porous Layer with Respect to Porosity and Its Effect on Heat Transfer Rate [Volume 49, Issue 1, 2017, Pages 171-184]
-
Porous Media
Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
-
Porous Media
Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
-
Porous medium
Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
-
Preload
Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2017, Pages 697-708]
-
Premixed flame
Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
-
Pressure drop
Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
-
Principal component analysis (PCA)
Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
-
Proper Orthogonal Decomposition
Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure [Volume 49, Issue 1, 2017, Pages 101-112]
-
Pseudo-potential model
Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
R
-
Random fields
Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2017, Pages 731-742]
-
Random vibration
Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2017, Pages 731-742]
-
Received: 6 July 2015
Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
-
Rectangular cups
Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2017, Pages 851-862]
-
Reduced Order Model
Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure [Volume 49, Issue 1, 2017, Pages 101-112]
-
Reentry Vehicle
Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
-
Residual Stresses
Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2017, Pages 839-850]
-
Resistance
Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
-
Revised: 23 December 2015
Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
-
Ribs
Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
-
Robust Control
Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
-
Robust Stability Margin
Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
-
Roll forming FEM simulation Design of experiments Strain distribution
Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
-
Roughness
Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
S
-
Sea wave energy converter
Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
-
Sedimentation
Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
-
Semi-open air circulation
Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
-
Shan-Chen model
Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
-
Shear Strength
Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2017, Pages 863-874]
-
Ship system
Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
-
Simultaneous Estimation
Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
-
Skewness and Flatness
Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
-
Slip coefcient
Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
-
Slip regime
Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
-
Smart plate
Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]
-
Soft tissue
Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
-
Solar air heater
Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
-
Solar collector
Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
-
Solid oxide fuel cell
Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
-
Solid oxide fuel cell
A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
-
Solid oxide fuel cell
Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
-
Spherical Packed Bed Pipe
Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
-
Square cylinder
Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
-
Star-shaped damaged wing
Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
-
State Estimation
Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2017, Pages 795-804]
-
Statistical information
Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
-
Stirling Engine
Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
-
Straight Tube
Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
-
Stream function
A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2017, Pages 819-828]
-
Stress intensity factor
Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2017, Pages 665-672]
-
Stress intensity factor
Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
-
Strouhal Number
Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
-
Surface effects
Investigation of surface effects on free torsional vibration of nanobeams [Volume 49, Issue 2, 2017, Pages 309-316]
-
Surface effects
Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
-
Surface roughness
Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
-
Swept wing
Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2017, Pages 785-794]
T
-
Tangential momentum accommodation coefcient
Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
-
Temperature
Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
-
Thermal lattice Boltzmann method
Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
-
Thermodynamic analysis
Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
-
Thermodynamic analysis
Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
-
Thermo-hydrodynamic analysis
Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2017, Pages 697-708]
-
Thermophoresis
Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
-
Third order shear deformation theory
Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2017, Pages 743-758]
-
Three-Dimensional flow
Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
-
Ti-6Al-4V sheet
Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
-
Tip leakage flow
Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
-
Torsional vibration
Investigation of surface effects on free torsional vibration of nanobeams [Volume 49, Issue 2, 2017, Pages 309-316]
-
Transient behavior
Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
-
Transient Flow
Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
-
T-stress
Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
-
Tube hydroforming
Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2017, Pages 829-838]
-
Turbulent flow
Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
-
Two lobe journal bearings
Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2017, Pages 697-708]
U
-
Uncertainty
Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2017, Pages 795-804]
-
Unknown boundary condition
Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
-
Unsteady flow
Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure [Volume 49, Issue 1, 2017, Pages 101-112]
-
Unsteady flow
Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
-
Upper bound
A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2017, Pages 819-828]
V
-
Various multi physical fields
Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2017, Pages 709-720]
-
Ventilation pattern
Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
-
Vibration analysis of Timoshenko micro beam
Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2017, Pages 709-720]
-
Volume of Fluid Method
Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
-
Vortex
Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
W
-
Wave calibration
Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
-
Wave tank
Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
-
Weight function method
Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2017, Pages 665-672]
-
Whirling
Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2017, Pages 759-772]
-
Wind tunnel
Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
-
Wind tunnel tests
Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
-
Wrinkling
Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2017, Pages 829-838]
Your query does not match with any item